Siam Subaru Webboard
General Discussion => Siam Subaru Society Forum => ข้อความที่เริ่มโดย: Chaiyaporn ที่ มกราคม 14, 2014, 08:14:45 am
-
:bbbear_48:
ได้ ดาว์โหลด Update firmware จาก web kenwood จาก file นี้
File "DNX_Ver1.12.0.zip" download (132 MB)
และ un zip และ save file ที่แตกแล้วลง usb ตามขั้นตอนแล้วแต่พออัพเดททำไมเครื่องวิทยุไม่เห็นมีอะไรพบ file ที่โหลดมาเลย ไม่ทราบว่าผมทำขั้นตอนไหนผิดไปบางครับ
:bbbear_20:
-
ลองเปลี่ยนแฟลช์ไดรฟ์เป็นแบบ FAT32 หรือยังครับ :bbbear_4:
-
เช็คแล้วเป็น FAT 32 ครับ
-
LAEW CHECK PEN FAT 32 KABB
-
:bbbear_38:
เข้าไปให้ 0 ทำดีกว่ามั้ยครับ ถึงมันจะไม่ยากอะไร ผิดพลาดอะไรขึ้นมาเดี๋ยว0มันเบี้ยวเอาครับ
ถ้าไม่กลัว วิธีทำตามขั้นตอนครับ
Updating the Program
1. Connect the USB memory.
2. When an audio file is played or No Media File is displayed,
press the [MENU] button and select STANDBY (standby
state).
3. Press the [Setup] icon to display the Setup Menu screen.
4. Press the [Software] to display the Software Information
screen.
5. Press the [Update] to update starts. (It takes about 3
minutes.)
Caution: The screen may go blank for a few seconds.
Do not unplug the USB memory or Power Off the unit
during the Update Procedure.
6. System Reboot & Software Update Screens
7. Once the Update completed screen is displayed, remove
the USB memory and restart the unit.
8. Check that the firmware version is updated, by referring to
Checking the Firmware Version.
When Version 1.12.0 (Group B)/ Version 1.12.0 (Group C) is
displayed, the firmware version is updated successfully.
-
ขอบคุณครับกำลังคิวว่าจะลืืมๆไปก่อนอีก4-5เดือนถ่ายน้ำมันเครื่องค่อยว่ากัน วิทยุออกแบบมาให้ใช้ยากจริงๆ ขอบคุณครับ
:bbbear_45:
-
ปกติมันต้อง Format Flash Drive ก่อน ถึง Save Firmware ครับ ไม่แน่ใจว่า ได้ Format หรือเปล่าครับ :bbbear_33: